2. Installation and Connection
Express5800/B120e-h User's Guide
79
Chapter 2 Preparations
In the ordinary operation, SUV cables may not be connected to a CPU blade. Proper cable(s) should be
connected to the USB, serial, and/or VGA ports on the CPU blade in the following cases:
•
Using a Flash FDD with the server installed in the N8405-016F/016AF/016BF/016CF/040F/040AF Blade
Enclosure
•
Performing
maintenance
work
•
Updating BIOS and firmware
Use K410-150(00) SUV cable connector of CPU blade. (K410-150(00) SUV cable is a standard accessory for
the Blade Enclosure (SIGMABLADE)).
Important
•
Do not use an external DVD-ROM drive connected via the K410-150(00) SUV
cable to install an operating system.
•
Use the internal DVD-ROM drive of Blade Enclosure to install an operating
system.
The K410-150(00) SUV cable has the USB, serial interface, and monitor connectors at the ends. Connect a
proper device at each of the ends.
The shape of SUV cable may differ depending on shipment time, however, functionality does not change.
To CPU blade
To USB devices
To monitor
To serial interface
device
To serial interface device
To monitor
To USB devices
(This connector has two ports.)
To CPU blade
