ftServer Setup Menus
5-12
Express5800/320Ma: Technical Reference Guide
Base I/O address
3F8 IRQ 4
2F8 IRQ 3
3E8 IRQ 4
2E8 IRQ 3
Sets the base I/O address for the
serial port.
Serial Port 1
Connection
Internal Modem
Serial Connector
Specifies whether Serial Port 1 is
used by the ASN modem or is
available for general use.
Do not select Internal Modem for
for Serial Port 1 if the system
contains VTMs.
Serial Port 2 Sharing
Enabled, Disabled
If enabled, the BMC can use Serial
Port B during BIOS power-on
self-test and also when the
operating system is running.
If disabled, the BMC can use Serial
Port 2 only during BIOS power-on
self-test.
NumLock
Auto (default)
NumLock is enabled at system boot
if a numeric keypad is detected.
On
NumLock is enabled at system
boot.
Off
NumLock is disabled at system
boot.
Keyboard repeat rate
30/sec
26.7/sec
21.8/sec
18.5/sec
13.3/sec
10/sec
6/sec
2/sec
Sets the number of times per
second the system repeats a
keystroke while the user
continuously presses the key.
Keyboard repeat delay
1/4 sec
1/2 sec
3/4 sec
1 sec
Sets the delay time that the system
allows between the moment a key
is first pressed and the moment that
the system repeats the keystroke.
Table 5-5. I/O Device Configuration Features (Continued)
Feature
Options
Description
Summary of Contents for Express5800/320Ma
Page 1: ...NEC Solutions America Inc NR550 Express5800 320Ma Technical Reference Guide...
Page 10: ...Preface x Express5800 320Ma Technical Reference Guide...
Page 24: ...ASN Connection Retry Cycle 2 10 Express5800 320Ma Technical Reference Guide...
Page 52: ...ftSMC Component Actions 3 28 Express5800 320Ma Technical Reference Guide...