![background image](http://html.mh-extra.com/html/nec/express5800-120rg-2/express5800-120rg-2_user-manual_251210046.webp)
2-14 General Description
LAN Connector Lamps
There are two lamps for each of the two LAN ports (connectors) on the rear panel.
LINK/ACT lamp
Each LINK/ACT lamp indicates the status of the standard network port of the server.
While power is supplied to the server and HUB and the connection is correct, the lamp is
on (green). The lamp turns green and flashes while the network port is
transmitting/receiving data.
If the lamp does not go on when the LINK state is placed, check if the network cable is in
normal state and if it is connected correctly. If the lamp does not go on yet when the
network cable is normal, the network (LAN) controller may be faulty. In this case,
contact your sales representative.
Speed lamp
This lamp indicates whether each of the network ports normally equipped with the server
is operated through the 1000BASE-T, 100BASE-TX or 10BASE-T network interface. If
the lamp is lit amber, the network port is operated through 1000BASE-T. If the lamp is
lit green, the network port is operated through 100BASE-TX. If the lamp is off, the
network port is operated through 10BASE-T.
Speed lamps
LINK/ACT lamps
Summary of Contents for Express5800/120Rg-2
