![background image](http://html.mh-extra.com/html/nec/express5800-120rg-2/express5800-120rg-2_user-manual_251210277.webp)
Upgrading Your Server 9-37
Use of internal hard disk drives in a disk array configuration
To use the internal hard disk drives in a disk array configuration in the server containing a disk array
controller board, reconnect the SCSI cables and LED cables on the mother board.
The internal hard disk drive interface is connected to the SCSI connector on the mother board at
shipment.
Standard configuration
With N8103-86F disk array controller connected
Mother board
REAR
FRONT
Hard disk
drive
SCSI ID3-5
Internal backup
device
Hard disk
drive
SCSI ID0-2
SCSI backplane
SCSI connector
Mother board
Hard disk
drive
SCSI ID3-5
Internal backup
device
Hard disk
drive
SCSI ID0-2
SCSI backplane
SCSI connector
N8103-86F
disk array controller
Connect the SCSI cable to the SCSI connector on
mother board to configure the disk array.
REAR
FRONT
Summary of Contents for Express5800/120Rg-2
