![background image](http://html.mh-extra.com/html/nec/express5800-120rg-2/express5800-120rg-2_user-manual_251210114.webp)
4-18 Configuring Your Server
Running the Utility
To run the utility, perform the following procedures:
1.
Power on the server.
The following message appears while POST is in progress.
IMPORTANT:
The message appears for each additional SCSI
controller.
Adaptec SCSI BIOS Vxxx xxxxx
(c) 2000 Adaptec, Inc. All Rights Reserved
Press <Ctrl> <A> for SCSISelect(TM) Utility!
2.
Press and hold
Ctrl
and
A
.
The SCSI
Select
utility starts and its Main menu appears.
3.
Select the channel and press
Enter
.
AIC-7902 A at Slot 23 02:03:00
AIC-7902 B at Slot 23 02:03:01
NOTE:
"AIC-7902A" is for backup file devices. "AIC-7902B" is for
internal SCSI hard disk drives.
The Options menu appears.
4.
Select option in the Options box and press
Enter
.
AIC-7902 at slot 23, 03:03:00
Would you like to configure the SCSI controller, or run the
SCSI Disk Utilities? Select the option and press <Enter>.
Options
SCSI Disk Utilities
Enable HostRAID Support
Configure/View SCSI Controller Settings
If you wish to configure the adapter or a device, select "Configure/View SCSI Controller
Settings".
If you wish to format a disk, verify disk media, or display a list of devices and their SCSI
IDs, select "SCSI Disk Utilities".
Summary of Contents for Express5800/120Rg-2
