5. RAID System Configuration
Express5800/T110f-S, R110f-1E, T110f-E Maintenance Guide
118
Chapter 2 Useful Features
(3) Priority
specification
For setting and displaying the priority of the background tasks (Rebuild, Patrol Read, and Consistency Check)
for the RAID controller, the WebBIOS uses numerical values while the Universal RAID Utility uses three levels
of high, middle, and low. The table below shows the correspondence between the numerical value ranges and
levels for each item. In this case, the priority is the percentage of the background task processing to all
processes being processed by the RAID controller.
•
Correspondence between the setting values for the WebBIOS and the display levels for the Universal
RAID Utility
Item
Setting values of the LSI
Software RAID
Configuration Utility
Display levels of the
Universal RAID Utility
80 to 100
High
31 to 79
Middle
Rebuild priority
0 to 30
Low
80 to 100
High
31 to 79
Middle
Patrol Read priority
0 to 30
Low
80 to 100
High
31 to 79
Middle
Consistency Check priority
0 to 30
Low
•
Values to be set when changing the level with the Universal RAID Utility
Item
Selection levels of the
Universal RAID Utility
Setting values
High 90
Middle 50
Rebuild priority
Low 10
High 90
Middle 50
Patrol Read priority
Low 10
High 90
Middle 50
Consistency Check priority
Low 10
Tips
•
The WebBIOS can specify the background initialization priority, but the Universal
RAID Utility cannot.
•
Although the Universal RAID Utility can specify the priority of initialization (Slow
Initialize), this server does not support this function.
