NEC EXP704 Page 131 Maintenance Manual Download

Page: 131 / 198

5. RAID System Configuration

Express5800/E120g-M Maintenance Guide

131

Chapter 2 Useful Features

）

Select values for

Virtual Drive Name

Disk WC

, and

Read Ahead

9-1.

Virtual Drive Name

: Specify the name of the virtual drive. (Optional)

9-2.

Disk WC

: Specify the Disk Write Cache policy.

9-3.

Read Ahead

: Specify the Read Ahead setting.

Parameter

Remarks

Disable

Does not perform read ahead.

Enable*

Performs read ahead.

* Recommended

Note

For RAID 10, the virtual drive can be created only with the maximum size.

Parameter

Remarks

Enable* Wright

back

Disable Write

through

* Recommended

* For this server, Setting “Enable” is recommended

for good performance. Note, however, that cached
data may be lost at an unexpected power failure.
Selecting “Disable” degrades performance by
approximately 50%, comparing with the “Enable”
setting.

Summary of Contents for EXP704







































































































































































































Search results

Summary of Contents for EXP704

Reviews:

Related manuals for EXP704

Brands by name

Popular brands

NEC EXP704, Maintenance Manual

Search results

Summary of Contents for EXP704

Reviews:

Related manuals for EXP704

Brands by name

Popular brands