2. Installation and Connection
Express5800/T110j User’s Guide
99
Chapter 2 Preparations
Power cord
Connect the provided power cord to the server.
Non-Redundant Power Supply Model (EXP339)
Note
Appearance of the power supply unit varies depending on the model number.
Redundant Power Supply Model (EXP339A)
When the power cord is connected to an outlet, POWER LED lights amber during initialization of the system.
Tips
To connect the power cord to a UPS, connect it to the outlet provided at the rear
of the UPS.
For details, refer to the instruction manual supplied with the UPS
In order to link the power supply from the UPS with the power-on/off of this
server, the BIOS settings change might be required depending on the UPS to
which the power cord of this server is connected.
In the BIOS Setup Utility, select
Server
, and then
AC-LINK
to change the
parameter to the appropriate value.
Secure the power cord by AC cable tie attached to the server.
Summary of Contents for EXP339
Page 127: ...MEMO...
