manualshive.com logo in svg

NEC EXP339, User Manual

Share
Download
NEC EXP339 User Manual Download Page 78

1. Installing Internal Optional Devices 

 

 

Express5800/T110j  User’s Guide 

78

Chapter 2  Preparations 

5. 

Insert the backup device into chassis. 
Do not push the backup device in completely as the 
cable has to be connected to the device. 

6. 

Connect the interface cable and power cable to the installed 3.5-inch backup device. 
For more information, see 

Chapter 2

 (

1.16 Connecting Cables)

. 

7. 

Push the device all the way until it clicks, indicating that it is locked. 

 

Note 

Arrange the unused power supply cable at the rear of the backup device so that this 
cable comes between the HDD cage and optical disk drive. Be careful not to apply 
a force to the I/F cable connector when pushing in the backup device. 

 

8. 

Assemble the server. 

9. 

Install device drivers for installed backup device as needed. 
For more information, refer to the manual provided with the backup device. 

 

 

 

Removal 

You can remove the backup device by reversing the installation procedure. If the devices are to remain 
removed, attach the stored dummy cover. 

Summary of Contents for EXP339

































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands