1. Installing Internal Optional Devices
Express5800/T110j User’s Guide
76
Chapter 2 Preparations
1.12
Optical Disk Drive
Procedures for replacing the standard optical disk drive with the optional internal DVD SuperMULTI drive are
described below.
Important
Do not install a drive manufactured by a third party.
Replacing drives
Follow the procedure below to replace your drive with the optional internal DVD SuperMULTI drive.
1. See
Chapter 2 (1.2 Overview of Installation and Removal)
for preparations.
2.
To remove the side cover and front bezel, see
Chapter 2 (1.3 Removing the Side Cover
and
.
3.
Remove the air duct. If a device is installed in the 5.25-inch expansion bay 1, remove it so that you
can access the cable connected to the optical disk drive.
4.
Disconnect the SATA cable and DC power cable
from the optical disk drive.
5.
Push the stopper on the right side and remove the
optical disk drive.
6.
Remove the bracket from the optical disk drive.
7.
Mount the bracket for the optical disk drive on the DVD SuperMULTI drive.
8.
Install the bracket with DVD SuperMULTI drive installed to the server.
9.
Connect the SATA cable and DC power cable you disconnected in step 4 to the server.
This completes the installation procedures.
Removal
You can remove the optical disk drive by reversing the installation procedure.
Summary of Contents for EXP339
Page 127: ...MEMO...
