3. Glossary
Express5800/T110j User’s Guide
124
Chapter 4 Appendix
3.
Glossary
Term Description
BIOS Setup Utility (SETUP)
Software for setting BIOS. You can run this software by pressing <F2> key during POST.
BMC
Baseboard Management Controller (BMC) is a built-in controller that supports the IPMI
version 2.0 protocol. BMC can manage the server hardware.
BMC RESET Switch
A switch for resetting the BMC of the server. This resets the BMC without clearing the
BMC settings.
Use the switch if the problem on the BMC occurs.
DUMP Switch
A switch that is used for collecting the memory dump if an error occurs. You can specify
the destination of the dump by using the Windows function.
EXPRESSBUILDER
Standard software for setting up the server easily. This also includes several useful
applications and instruction manuals.
BMC Management Console
Remote management interface which BMC provides. It is available via web browser.
Express Report Service
Software that can report the server failure to the contact center by E-mail or modem.
This software is installed with NEC ESMPRO ServerAgentService to the server.
Express Report Service
(HTTPS)
Software that can report the server failure to the contact center by HTTPS. This software
is installed with NEC ESMPRO ServerAgentService to the server.
Express Report Service (MG)
Software that can report the server failure to the contact center by E-mail, modem or
HTTPS without NEC ESMPRO ServerAgentService. This software is installed with NEC
ESMPRO Manager to "PC for Management".
ExpressUpdate
A feature for updating BIOS, firmware, driver, or software of the server. This feature is
available when NEC ESMPRO Manager cooperates with BMC and ExpressUpdate
Agent.
ExpressUpdate Agent
Software for performing ExpressUpdate. This is installed to the server.
Flash FDD
An optional USB device that can use as a floppy disk drive.
Internal Flash Memory
A built-in flash memory that stored EXPRESSBUILDER as standard. You can start
EXPRESSBUILDER from it without DVD when pressing <F3> key during POST.
NEC ESMPRO
Standard software for the server management. This consists of several applications for
managing or monitoring.
NEC ESMPRO Agent
Extension
Software for performing the scheduled operations. This works with NEC ESMPRO
Manager.
NEC ESMPRO Manager
Software for managing multiple servers on network.
NEC ESMPRO
ServerAgentService
Software for monitoring the server. This works with NEC ESMPRO Manager. You can
choose Service Mode or Non-Service Mode when installing this software. Service Mode
resides as the OS service and Non-Service Mode does not use the OS service to reduce
memory, CPU power, and other OS resources.
OEM driver
A Windows driver for the mass storage device.
OS standard installer
An installer that stored in Windows installation disc. Use this installer if you want to install
the OS manually.
Offline tools
Software that can read or change SEL, SDR, FRU, and other IPMI data. You can start
Offline tools from EXPRESSBUILDER.
PC for Management
A computer for managing the server on network. A general Windows/Linux computer
can be used as "PC for Management".
Product Info Collection Utility
Software for collecting several hardware/software statuses or event logs. You can easily
collect the data for the server maintenance by using this software.
RAID Configuration Utility
Software for configuring RAID arrays. You can run this software during POST.
Server Configuration Utility
Software for setting BIOS or BMC. You can use as Windows application or run this
software stored in EXPRESSBUILDER.
Summary of Contents for EXP339
Page 127: ...MEMO...
