NEC EXP320J, User Manual

Page: 414 / 504

7-4 Troubleshooting
POST Error Messages
Powering on the server automatically starts the self-diagnostic program, POST (Power On
Self-Test). When POST detects any error, it displays an error message and its measure on the
display unit. Follow the table below to troubleshoot such errors.
Phoenix BIOS 4.0 Release 6.0.XXXX
:
CPU=Pentium III XXX MHz
0640K System RAM Passed
0127M Extended RAM Passed
WARNING:
02B0: Diskette drive A error.
:
press <F1> to resume, <F2> to SETUP
Message indicating a floppy disk drive error
TIPS:
For error messages on optional PCI boards, refer to the manual provided with those options.
On-screen error message Cause Action
0200 Failure Fixed Disk
•
HDD is faulty
•
CPU/IO module is faulty.
•
Replace the HDD.
•
Replace the CPU/IO module.
0210 Stuck Key Keyboard connection error
•
Disconnect the keyboard and
connect it back again.
•
Replace the keyboard.
0211 Keyboard error Keyboard is faulty.
•
Disconnect the keyboard and
connect it back again.
•
Replace the keyboard.
•
If restarting does not help,
replace the CPU/IO module.
0212 Keyboard Controller
Failed
Keyboard controller is faulty. If restarting the server does not
help, replace the CPU/IO module.
0213 Keyboard locked -
Unlock key switch
Keyboard is locked. Unlock the key switch.
0230 System RAM Failed at
offset
DIMM is faulty.
•
Replace DIMM.
•
Replace the CPU/IO module.
0231 Shadow RAM Failed at
offset
Shadow RAM is faulty.
•
Replace DIMM.
•
Replace the CPU/IO module.
0232 Extended RAM Failed at
address line
Extended RAM is faulty.
•
Replace DIMM.
•
Replace CPU/IO module.
0233 Memory type mixing
detected
Memory of the different types
is installed. Memory of the different types is
installed. Replace DIMM with
appropriate one.
0250 System battery is dead
-Replace and run
SETUP
System battery is dead.
•
Replace system battery.
•
Replace CPU/IO module.