NEC E328 User Manual Download | Manualshive

Page: 56 / 90

background image

English - 53

HTTP Browser

Overview

Connect the monitor with a commercially-available LAN cable to configure the LAN settings using the HTTP server function.
This monitor uses “JavaScript” and “Cookies” and the browser should be set to accept these functions. Refer to the help files for

the Web browser to change the settings to use JavaScript and Cookies.
To access the HTTP server, launch a web browser on a computer connected to the same network as the monitor and enter the

following URL in the Web address field.

Network Settings

http://<Address IP of the monitor>

NOTEN:

• The control software can be downloaded from the NEC Display website.
• By default, the IP address of the monitor is set automatically. After a reset, the IP address is obtained

automatically.

• Depending on the network environment, the display speed and response to commands or clicks on buttons may

be slow, or the operations may not be recognized. In such a case, consult your network administrator.

The monitor may not respond if the buttons shown on the browser are repeatedly pressed in rapid intervals. In

such a case, wait a moment and try again. If you still can’t get a response, turn the monitor off and then back on.

• If the monitor Network Settings screen does not appear in the Web browser, press the Ctrl+F5 keys to refresh

your Web browser.

• To control the monitor via a LAN, see “External_Control.pdf” in our Website (see “Appendix B External

). If the screen does not appear, clear the cache of the Web browser.

Preparation Before Use

Connect the monitor to the network using a commercially-available LAN cable before attempting to use browser operations.
Operation with a browser that uses a proxy server may not be possible depending on the type of proxy server and the setting

method. Although the type of the proxy server will be a factor, it is possible that items that have been set will not be shown

depending on the effectiveness of the cache, and the settings configured from the browser may not be reflected in operation. It

is recommended that a proxy server is not used unless the network environment requires it.

«
...
54
55
56
57
58
...
»

Summary of Contents for E328



























































































Reviews:

No comments

Related manuals for E328

Brand: Panasonic Pages: 29

Brand: Daewoo Pages: 48

Brand: Denver Pages: 18

Brand: F&U Pages: 86

Brand: Dynex Pages: 2

Brand: Proline Pages: 197

Brand: Hisense Pages: 75

Brand: Daewoo Pages: 47

Brand: VisionQuest Pages: 48

Brand: Linsar Pages: 52

Brand: TCL Pages: 98

Brand: Casper Pages: 8

Brand: Zenith Pages: 34

Brand: Panasonic Pages: 44

Brand: Panasonic Pages: 32

Brand: Samsung Pages: 289

Brand: Go-Video Pages: 22

Brand: Sencor Pages: 36

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands