NEC E328 User Manual Download

Page: 5 / 90

English - 2

Important Information

Safety Precautions and Maintenance

FOR OPTIMUM PERFORMANCE, PLEASE NOTE

THE FOLLOWING WHEN SETTING UP AND

USING THE LCD TV:

About the Symbols

To ensure safe and proper use of the product, this manual uses a number of symbols to prevent injury to you and

others as well as damage to property. The symbols and their meanings are described below. Be sure to understand

them thoroughly before reading this manual.

ARNINN

Failing to heed this symbol and handling the product incorrectly could result in accidents

leading to major injury or death.

CAUTION

Failing to heed this symbol and handling the product incorrectly could result in personal

injury or damage to surrounding property.

Examples of symbols

Indicates a warning or caution.

This symbol indicates you should be careful of electric shocks.

Indicates a prohibited action.

This symbol indicates something that must be prohibited.

Indicates a mandatory action.

This symbol indicates that the power cord should be unplugged from the power outlet.

ARNINN

UNPLUG THE

POWER CORD

Unplug the power cord if the product malfunctions.
Should the product emit smoke or strange odors or sounds, or if the product has been

dropped or the cabinet broken, turn off the product’s power, then unplug the power cord

from the power outlet. Failure to do so could not only lead to fire or electric shock, it

could also result in burn impairment. Contact your dealer for repairs.
Never try to repair the product on your own. Doing so is dangerous.

Do not open or remove the product’s cabinet.
Do not disassemble the product.
There are high voltage areas in the product. Opening or removing product covers and

modifying the product may expose you to electric shock, fire, or other risks.
Refer all servicing to qualified service personnel.

Do not use the product if it has structural damage.
If you notice any structural damage such as cracks or unnatural wobbling, please refer

servicing to qualified service personnel. If the product is used in this condition, the

product may fall or cause personal injury.

Summary of Contents for E328



























































































Search results

Summary of Contents for E328

Reviews:

Related manuals for E328

Brands by name

Popular brands

NEC E328, User Manual

Search results

Summary of Contents for E328

Reviews:

Related manuals for E328

Brands by name

Popular brands