NEC E328 User Manual Download

Page: 77 / 90

English - 74

Video Settings

Video
Picture Mode

Provides pre-configured video settings suitable for various environments where this device

may be used, or customize settings to your preference.

HDR Video

Video setting for the HDR format. (Can be selected only when an HDR signal is input.)

Dynamic

High-contrast video setting.

Standard

Standard setting.

Energy Savings

Video setting complying with International Energy Star standard.

Conferencing

Video setting suited for video conferences.

HighBright

Maximum backlight brightness with higher color temperature for brighter ambient environments.

Custom

Customizable settings.

Advanced Video

Menu used to adjust detailed video settings.

Aspect Ratio

Select the aspect ratio of the screen image. For more information, see “Setting the Aspect

Ratio” in this manual.

NOTEN:

• [Zoom] cannot be used when a 4K signal is input. (E438/E498/E558/E658)
• [Zoom] cannot be used when an FHD signal is input. (E328)

Normal

Maximizes the size without changing the aspect ratio.

1:1

Shows the image in a 1 by 1 pixel format. (If the input resolution is higher than the

recommended resolution, the image will be scaled down to fit the screen).

Full

Fills the entire screen even if the aspect ratio needs to be changed.

Zoom

Fills the entire screen without changing the aspect ratio.

NOTEN:

The areas of the image that are outside of the active screen area are not shown.

Overscan

Selects the image display area.

Auto

The image display area is set automatically.

Approximately 95 % of the image will be shown on the screen.

Off

The whole image is displayed within the screen area. This setting may cause noise at the

edges of the screen depending on the signal.

NOTEN:

When you use a computer with an HDMI output, set it to [OFF].

Dimming Setting

The brightness of the backlight is optimized, while the contrast can be increased and the

consumption reduced.

Off

The backlight is not controlled.

Dynamic Backlight

Automatically adjusts the brightness level of the entire screen according to the input signal.

Local Dimming

Automatically adjusts each of the clusters of the LCD backlight independently according to the

input signal.

(All models except E328)

Summary of Contents for E328



























































































Search results

Summary of Contents for E328

Reviews:

Related manuals for E328

Brands by name

Popular brands

NEC E328, User Manual

Search results

Summary of Contents for E328

Reviews:

Related manuals for E328

Brands by name

Popular brands