English - 52
Pin Assignment
RS-232C input / output
Pin No.
Name
1
NC
2
RXD
3
TXD
4
NC
5
GND
6
NC
7
NC
8
NC
9
NC
This monitor uses RXD, TXD and GND lines for RS-232C control.
Controlling the Monitor via LAN
The monitor is equipped with a LAN port (RJ-45). Connecting the monitor to a network allows you to receive email notifications
from the monitor and control the monitor from a computer via a network. To use a LAN connection, you are required to assign an
IP address to the monitor (
).
The monitor will obtain an IP address automatically when connected to a DHCP network.
NOTEN:
Set [Control Interface] under [Control Settings] to [LAN]
).
Example of LAN connection
Server
Hub
NOTEN:
NOTE: Use a category 5 or higher LAN cable.
LAN cable
(commercially available)
D-sub 9-pin (monitor side)
1
6
5
9
