NEC DT830CG User Manual Download Page 130

Page: 130 / 281

122

SPEED CALLING - SYSTEM

• TO SET SPEED CALLING - SYSTEM

KEY

(ONE-TOUCH SPEED CALLING KEY)

STEP 1: Press

lamp lights red.

STEP 2: Press a desired

One-Touch Speed Calling

key. The LCD displays previously stored dig-
its.

STEP 3: Dial the Speed Calling – System Access

Code and the abbreviated call code.

STEP 4: Press

again.

lamp goes off.

• TO OPERATE FROM SPEED CALLING-

SYSTEM KEY

STEP 1: Press the Speed Calling – System key.

STEP 2: If the DT830G does not have the “Speed Call-

ing – System” key, dial the Speed Calling –
System Access Code, then the abbreviated
call code.

ONE-TOUCH SPEED CALLING SET-
TING USING
SPD SET SOFT KEY

You can add, edit, or delete a

One-Touch Speed

Calling

key using programmable Line/Feature Key or

SPD Set

key. When using

SPD Set

soft key,

One-

Touch Speed Calling

can be set when the terminal in

off-hook status (idle), otherwise, it is invalid.

To Add the One-Touch Speed Calling Key
with SPD Set Key as New Data

STEP 1: Press the

SPD Set

key.

STEP 2: Press the desired

One-Touch Speed Call-

ing

key.

Feature

1:25 PM MON 11 MAY 2015

SPEED SET

1:25 PM MON 11 MAY 2015

XXXX

Note

SPD Set

is available for SV9500 V2 or later.

Note

SPD Set

is configured at the installation stage.

1:25 PM MON 11 MAY 2015

SPD Set Mic NoDist

1:25 PM MON 11 MAY 2015

SPD Set Mic NoDist

Push Speed Calling Key

Summary of Contents for DT830CG


























































































































































































































































































Search results

Summary of Contents for DT830CG

Reviews:

Related manuals for DT830CG

Brands by name

Popular brands

NEC DT830CG, User Manual

Search results

Summary of Contents for DT830CG

Reviews:

Related manuals for DT830CG

Brands by name

Popular brands