manualshive.com logo in svg

NEC DT830 Series, User Manual

Share
Download
NEC DT830 Series User Manual Download Page 47

TO ENABLE/DISABLE RTP
ALARM

Following explains how to enable/disable RTP
Alarm. The RTP Alarm tone allows the terminal
user to be notified that the voice packet is not
received in a certain period of time because of the
network delay etc.

1.

Press 

 key to display the Menu

Screen.

2.

Select “Setting”.

Highlight an item by using 

, and press

.

3.

Select “  User Setting”.

Select one of the following operations.

•

Highlight an item by using 

, and press

, 

 or Soft key (OK).

•

Press 

.

4.

Select “  Talk”.

Select one of the following operations.

•

Highlight an item by using 

, and press

, 

 or Soft key (OK).

•

Press 

.

5.

Select “  RTP Alarm”.

Select one of the following operations.

•

Highlight an item by using 

, and press

, 

 or Soft key (OK).

•

Press 

.

6.

Select whether to ring the RTP
Alarm.

Select one of the following operations.

•

Highlight an item by using 

, and press

 or Soft key (OK).

•

Press 

 - 

, and press 

 or Soft key

(OK).

If the “

 Automatic” is selected, this feature

is activated in accordance with the system
data setting. If it is not specified by the
system data this feature is in effect (RTP
Alarm = ‘ON’). For details, please contact the
system administrator.

TERMINAL SETUP

40

Summary of Contents for DT830 Series



























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands