NEC DSX-160 Feature Handbook Download Page 71

Page: 71 / 188

Door Box (Analog)

DSX Feature Handbook

Features

◆

Features

Controlling the Door Strike

In these instructions:
[Super Display Soft Key]
[Keyset Soft Key]

To activate the Door Box relay (which in turn controls the door strike):

• Once set up in programming, this option is available to any member of the Door Box Ring Group as well as any

extension with a Call Coverage key for the Door Box Ring Group.

Place or answer a Door Box call.

Do one of the following.

[OPEN]
[OPEN]

Select to open the Door Box relay (if closed/activated).

• Alternately press

FLASH

[CLOSE]
[CLOSE]

Select to close the Door Box relay (if open/deactivated).

• Alternately press

FLASH

At a single line telephone, hook

ash to open or close the Door Box relay,

Summary of Contents for DSX-160





























































































































































































Search results

Summary of Contents for DSX-160

Reviews:

Related manuals for DSX-160

Brands by name

Popular brands

NEC DSX-160, Feature Handbook

Search results

Summary of Contents for DSX-160

Reviews:

Related manuals for DSX-160

Brands by name

Popular brands