NEC DSX-160 Feature Handbook Download Page 30

Page: 30 / 188

Call Forwarding

◆

Features

DSX Feature Handbook

❥

For

NUM

, dial

HOLD

❥

For

, enter a name of your ch

HOLD

❥

Press

SPEAKER

to exit.

While the extension is idle

, pressing the bin key puts the extension in the Call Forwarding programing mode

- the same as pressing

INTERCOM

and dialing

❥

If the extension has Call Forwarding enabled, and the user presses the bin key and waits (for at least 6

seconds), Call Forwarding is automatically cancelled.

❥

If the extension has Call Forwarding disabled, and the user presses the bin key and waits (for at least 6

seconds), the prior Call Forwarding mode is automatically enabled (if any).

Call Forwarding Con

rmation Tone

Keyset users will hear a single con

rmation beep after enabling or cancelling Call Forwarding. Single line

telephone users will hear Intercom dial tone after enabling or cancelling Call Forwarding.

Summary of Contents for DSX-160





























































































































































































Search results

Summary of Contents for DSX-160

Reviews:

Related manuals for DSX-160

Brands by name

Popular brands

NEC DSX-160, Feature Handbook

Search results

Summary of Contents for DSX-160

Reviews:

Related manuals for DSX-160

Brands by name

Popular brands