NEC DSX-160 Feature Handbook Download Page 125

Page: 125 / 188

Paging

DSX Feature Handbook

Features

◆

117

Features

Operation

User Programmable Feature

Making a Page Announcement

In these instructions:
[Super Display Soft Key]
[Keyset Soft Key]

To make an internal Paging announcement:

Lift the handset.

Do one of the following.

Press

INTERCOM

, dial

, then dial the page zone number (1-7 or 0 for All Call).

Press your Paging key.

• If you are on an Intercom call when you press a Paging key, the system disconnects the internal

call and activates the page.

Make announcement and hang up.

• The system may limit the length of your announcement.

To answer a call that is ringing over the Paging speakers:

Lift the handset.

Dial *0.

Converse with the caller.

•

Enabling Incoming Paging

Feature

Mnemonic

Operation

Access Level

Paging (Incoming)

#VP (#87)

#VP

to enable or

to d

SPEAKER

to exit.

3-5

Summary of Contents for DSX-160





























































































































































































Search results

Summary of Contents for DSX-160

Reviews:

Related manuals for DSX-160

Brands by name

Popular brands

NEC DSX-160, Feature Handbook

Search results

Summary of Contents for DSX-160

Reviews:

Related manuals for DSX-160

Brands by name

Popular brands