NEC DSX-160 Feature Handbook Download Page 177

Page: 177 / 188

Voice Mail

DSX Feature Handbook

Features

◆

169

Features

Operation

The Voice Mail Basics

In these instructions:
[Super Display Soft Key]
[Keyset Soft Key]

To call your mailbox:

(Optional) Check the status of your mailbox.

• On your display,

V-Mail xx

[VMxx]

is the number of new messages in your mailbox.

• In addition, your Ring/Message lamp

ashes fast (red) when you have new messages.

Press

V-MAIL

•

V-MAIL

is on (red) while you are connected to your mailbox.

If requested, enter your Security Code.

To hang up while using your mailbox:

Press

V-MAIL

• The key goes out.

To leave a message in the mailbox of an unanswered extension:

• The extension can be busy, in DND, or unanswered.

Press

V-MAIL

• Voice mail will prompt you to leave a message.

Activating or Canceling Call Forwarding to your Mailbox

In these instructions:
[Super Display Soft Key]
[Keyset Soft Key]

To activate or cancel Call Forwarding to your mailbox:

Select the Call Forwarding options.

[P Call Forward]
[Prog + Cfwd]

Alternately do one of the following:

• Press

INTERCOM

and dial

• Press your Call Forwarding Feature Key.

Select or cancel a Call Forwarding type.

[Immediate]
[Imm]

Select Call Forwarding Immediate.

• Alternately dial

[Ring/No Ans]
[RNA]

Select Call Forwarding when Not Answered.

• Alternately dial

[Busy/No Ans]
[BNA]

Select Call Forwarding when Busy or Not Answered.

• Alternately dial

[None]
[MORE + MORE + NONE]

Select to cancel Call Forwarding.

• Alternately dial

Press

V-MAIL

Select the Call Forwarding type.

[All]
[All]

Select forwarding all calls.
Alternately dial

[Trunk Only]
[Trnk]

Select forwarding outside calls only.
Alternately dial

Summary of Contents for DSX-160





























































































































































































Search results

Summary of Contents for DSX-160

Reviews:

Related manuals for DSX-160

Brands by name

Popular brands

NEC DSX-160, Feature Handbook

Search results

Summary of Contents for DSX-160

Reviews:

Related manuals for DSX-160

Brands by name

Popular brands