NEC DS2000 IntraMail Feature Handbook Download Page 42

Page: 42 / 216

Press

to turn Automatic Call Screening on.

Press

to turn Automatic Call Screening off.

The top line of the display shows the Automatic

Call Screening status.

Press to

exit.

To intercept the call (and stop recording the message):

●

. Press ,

Press

SPK

, or

Lift the handset, or
Press

To continue listening to your caller’s message as it is being
recorded:

●

Do nothing.

To exit Call Screening and allow the message to continue
recording in private:

●

Press .

To use another feature or process another call:

●

Press

+ Lift the handset or press any other fea-

ture key.

EXIT

ANSWER (ANSW)

EXIT

OFF

Call Screening (with IntraMail)

80000mfh08-01.qxd 12/10/04 3:20 PM Page 34

Summary of Contents for DS2000 IntraMail

























































































































































































































Search results

Summary of Contents for DS2000 IntraMail

Reviews:

Related manuals for DS2000 IntraMail

Brands by name

Popular brands

NEC DS2000 IntraMail, Feature Handbook

Search results

Summary of Contents for DS2000 IntraMail

Reviews:

Related manuals for DS2000 IntraMail

Brands by name

Popular brands