NEC DS2000 IntraMail Feature Handbook Download Page 167

Page: 167 / 216

To place a Reverse Voice Over call:

While on a handset call, press and hold your Reverse
Voice Over key.

You hear two beeps, then conversation with your

co-worker in your handset.

Your Voice Over key lights red.

To return to your initial caller:

Release your Reverse Voice Over key.

Conversation with your initial caller (in your

handset) continues.

Your Voice Over key goes out.

To place a call to the co-worker assigned to your Reverse
Voice Over key:

While your telephone is idle, press your Reverse Voice
Over key.

You hear two beeps, then conversation with your

co-worker.

Your Reverse Voice Over key goes on (green).

159

Reverse Voice Over

80000mfh08-01.qxd 12/10/04 3:20 PM Page 159

Summary of Contents for DS2000 IntraMail

























































































































































































































Search results

Summary of Contents for DS2000 IntraMail

Reviews:

Related manuals for DS2000 IntraMail

Brands by name

Popular brands

NEC DS2000 IntraMail, Feature Handbook

Search results

Summary of Contents for DS2000 IntraMail

Reviews:

Related manuals for DS2000 IntraMail

Brands by name

Popular brands