Option Installation 3-15
Figure 3-10 shows a three-connector diskette drive signal cable.
Figure 3-10 Diskette Drive Signal Cable
IDE Signal Cables
Each system comes with a three-connector IDE interface cable attached to the primary IDE
connector and the installed hard disk. A second IDE cable connects to the CD-ROM reader
and to the secondary IDE connector. In some systems, a Zip drive also comes attached to
the primary IDE cable.
Figure 3-11 shows a typical three-connector IDE cable. If the IDE cable is not keyed with a
connector tab, align the colored edge of the cable with the pin 1 side of the drive connector.
Figure 3-11 IDE Signal Cable
Summary of Contents for Direction T-Series
Page 8: ...Contents ix...