3-22 Option Installation
6.
Remove the plastic blank panel from the selected slot by pressing the panel tab
and swinging the blank panel out (see Figure 3-18).
Figure 3-18 Removing the Blank Panel
7.
Remove the metal slot cover by carefully pressing it until it breaks away from the
chassis. Be careful of sharp edges!
8.
Slide the device into the slot and secure the device.
9.
Connect the device cables.
10.
Replace the front panel.
11.
Replace the access cover.
Installing a 5 1/4-Inch Device
Install an accessible device into the device slot as follows.
1.
Follow the preinstallation instructions that came with the device, such as setting
jumpers and switches.
NOTE:
If your 5 1/4-inch device comes with
drive rails, do not attach them. Remove any rails
attached. See the documentation that comes with
the device.
Summary of Contents for Direction T-Series
Page 8: ...Contents ix...
