Option Installation 3-27
RS-232C Device Connection
NOTE:
Before connecting a serial device to the
system, be sure the serial device is set up
correctly. Follow the setup instructions that
come with the option.
1.
Turn off power to the system and to the serial device.
2.
Connect one end of the serial cable to the COM1 port on the rear of the computer
(see Figure 3-21).
3.
Secure the cable with the screws provided.
4.
Connect the other end to the serial device.
5.
Turn on the serial device and the computer.
Figure 3-21 Locating COM Ports
Summary of Contents for Direction T-Series
Page 8: ...Contents ix...
