3-10 Option Installation
Figure 3-5 Removing a DIMM
5.
Store the DIMM in an antistatic bag (available at electronic supply stores) or a
cardboard box.
DIMM Installation
Use the following procedure to install a DIMM.
1.
Remove the access cover.
2.
Locate the DIMM sockets.
3.
Remove any currently-installed DIMMs that are not needed. See “DIMM
Removal” in this chapter.
CAUTION:
Before installing a DIMM, reduce
static discharge by touching the system’s metal
chassis.
4.
To install a DIMM, align the module with an empty socket. Make sure that the
notches on the DIMM line up with the keys in the sockets.
5.
Insert the DIMM into the socket. Close the plastic clips at both ends of the
socket.
Summary of Contents for Direction 233L
Page 9: ...x Contents ...
