![background image](http://html1.mh-extra.com/html/nec/a201ne/a201ne_user-manual_3882671214.webp)
212
Q.
Resetting factory defaults (Initialize)
A.
On the displayed menu,
Quick Menu
Setting
Mainte
Init
, or you can use Web UI to
initialize. For details, see "
" (for Web UI).
Q.
Canceled phone number appears on Web UI
A.
Phone number may appear on Web UI screen depending on
terms of contract or cancellation method.
Q.
Phone number does not appear
A.
USIM Card may be defective. Rewriting phone number
on USIM Card or replacing USIM Card may be needed.
Contact "
Q.
Wi-Fi router operations are unstable
A.
Confirm that Wi-Fi router is not used in extreme
temperatures/high humidity/direct sunlight/dusty
areas. Read "
" beforehand for using
under proper environment.
Q.
Wi-Fi router goes off
A.
Confirm that Wi-Fi router is not used in extreme
temperatures/high humidity/direct sunlight/dusty
areas. Read "
" beforehand for using
under proper environment.
A.
Reboot Wi-Fi router and check Battery level. If Battery
level is low, charge Battery, power on 10 minutes after
charging starts, then check if Wi-Fi router works
properly.
Q.
Wi-Fi router is inoperative
A.
Operate as follows.
Long press
In "Power Option",
Power
(Power
OFF)
Wait awhile and then turn the power on
" regarding turning off the power.
Q.
Connection for voice chat or video chat fails
A.
Confirm that you are in a service area.
A.
The incoming signal strength may be poor. Move to where
signal is stronger.
A.
For UPnP compatible application, enable UPnP. Activate
Web UI, "Advanced Settings"
Other Settings
Set
"UPnP Settings" to
ON
Apply
A.
Change Wi-Fi advanced settings or connect with USB
Cable (sample). For Wi-Fi advanced settings, see "
Q.
Wi-Fi router drains battery fast
A.
The battery may drain fast depending on the settings,
such as the Brightness Adjustment of the Display, Auto-
off Timing, and Energy-Saving timer of Sleep mode, so
change these settings. For details, see "
Changing the Auto-off Timing of the
Display
," and "
."
A.
When the network connection is unstable, Wi-Fi router
drains Battery quickly.
A.
Usage times gradually become shorter due to repeated
charging/discharging.
A.
The battery drains faster when "2.4GHz/5GHz" is set.
Change "Wi-Fi Frequency Settings" to "5GHz (W52),"
"5GHz (W56)," or "2.4GHz."
Q.
Charging is not possible
A.
Use the specified AC Charger (sold separately).
A.
Charging may be impossible under the following
conditions.
・Charging may stop to increase the service life of the
Battery.
・To protect the Battery, if charging continues for a
long time while the power is ON, the battery level may
be gradually reduced automatically to the "Long Life
Charge" state (maximum charge level is about 70%).
・Charging may not start if the battery level is above
about 80%.
・If Long Life Charge is set to "Use," then charging may
not start if the battery level is above about 60%.
A.
First, disconnect the AC Charger (sold separately) or
Cradle (sold separately), wait at least 10 seconds, and
then connect them again to restart charging.
A.
When power supply setting is set to
ON
(Use), change
the settings to
OFF
(Do not use).
Q.
Unable to connect to Web UI
A.
) is entered
correctly in the address bar.
A.
Check Wi-Fi router's battery level. If Battery level is
low, charge Battery with PC using USB Cable (sample) or
AC Charger (sold separately).
A.
Confirm that Wi-Fi router and PC are properly connected
via WLAN or USB Cable (sample).
A.
If Wi-Fi router is connected via WLAN to a WLAN device,
temporarily power off Wi-Fi router, then power it on
again.
A.
If Wi-Fi router is connected using USB Cable (sample),
remove Wi-Fi router from PC, then reconnect.
A.
If Wi-Fi router and a PC are connected using a wired LAN
cable by using Cradle (sold separately), remove Cradle
from the PC, then reconnect it.
A.
Depending on Wi-Fi router's state, connection to Web UI
may be impossible. In this case, temporarily power off
Wi-Fi router, then power on again.
Summary of Contents for A201NE
