10
・Can change selected items each time
/
is
pressed.
・Information
Item
Description
Info
Check Device Information, Wi-Fi
Information, Connected Devices, Bluetooth
Information, Notice for 5GHz band, Web UI,
MAC Address, and IP Address.
Data
Check this month's data usage.
Notify
Confirm notifications.
WAN
Check APN Information and Wi-Fi Spot
Information.
Cert
Check credentials.
・Quick Menu
Item
Description
NW Mode
Set Network mode.
Wi-Fi Freq
Set Wi-Fi Frequency Band.
Setting
Set Wi-Fi connection settings, Network
items, Wi-Fi Spot, LAN Settings items,
Cradle settings items, Energy-Save/
charging items, Display items, Security
items, Maintenance items, and Data Usage
items.
Pow save
Set Energy-Saving Mode, Energy-Saving
timer, Long Life Charge, and Power supply
setting.
Wi-Fi Spot
Set Wi-Fi Spot and SoftBank Wi-Fi Spot
settings.
Display Off/Sleep Mode
・If Wi-Fi router is not used for a certain period of time,
Display turns off automatically. To turn on Display again,
press
.
・Sleep mode is a function from which the system can quickly
return to a usable state, even though wireless were stopped.
・If Wi-Fi router is not connected to a WLAN device, and there
has been no operation of Wi-Fi router for a certain period of
time, or if Battery is not being charged, Display turns off and
Wi-Fi router enters Sleep mode to save power (time before
entering Sleep mode is set to 5 minutes by default).
・When in Sleep mode, WLAN function is disabled.
・Long pressing
for about 3 seconds until "Pocket WiFi
5G" appears cancels Sleep mode. After Sleep mode is cancelled,
WLAN function is enabled and Wi-Fi router can reconnect to
WLAN devices.
・Some WLAN devices will disconnect a WLAN connection if
there is no transmission for a certain period of time after
connecting. If such a device is connected to Wi-Fi router, the
device may disconnect and Wi-Fi router may enter Sleep mode.
・To change the time before Wi-Fi router enters Sleep mode or
the on/off setting, use the displayed menu on Wi-Fi router
or Web UI. For details, see "
"
."
・When set to Sleep mode, a maximum of approximately 400
hours of standby is possible.
・Energy-Saving Mode is set to Sleep mode at time of purchase.
Summary of Contents for A201NE
