NEC 78K/0S Series User Manual Download Page 73

Page: 73 / 123

CHAPTER 5 EXPLANATION OF INSTRUCTIONS

User’s Manual U11047EJ3V0UM00

CMP

Compare

Byte Data Comparison

[Instruction format]

CMP dst, src

[Operation]

dst – src

[Operand]

Mnemonic

Operand (dst, src)

Mnemonic

Operand (dst, src)

CMP

A, #byte

CMP

A, !addr16

saddr, #byte

A, [HL]

A, r

A, [HL + byte]

A, saddr

[Flag]

[Description]

•

The source operand (src) specified with the 2nd operand is subtracted from the destination operand (dst)

specified with the 1st operand.

The subtraction result is not stored anywhere and only the Z, AC, and CY flags are changed.

•

If the subtraction result is 0, the Z flag is set (1). In all other cases, the Z flag is cleared (0).

•

If the subtraction generates a borrow at bit 7, the CY flag is set (1). In all other cases, the CY flag is cleared

(0).

•

If the subtraction generates a borrow from bit 4 to bit 3, the AC flag is set (1). In all other cases, the AC flag

is cleared (0).

[Description example]

CMP 0FE38H, #38H; 38H is subtracted from the contents at address FE38H and only the Z, AC, and CY flags

are changed (comparison of contents at address FE38H and the immediate data).

Summary of Contents for 78K/0S Series




























































































































Search results

Summary of Contents for 78K/0S Series

Reviews:

Related manuals for 78K/0S Series

Brands by name

Popular brands

NEC 78K/0S Series, User Manual

Search results

Summary of Contents for 78K/0S Series

Reviews:

Related manuals for 78K/0S Series

Brands by name

Popular brands