NEC 78K/0S Series User Manual Download Page 67

Page: 67 / 123

CHAPTER 5 EXPLANATION OF INSTRUCTIONS

User’s Manual U11047EJ3V0UM00

ADDC

Add with Carry

Addition of Byte Data with Carry

[Instruction format]

ADDC dst, src

[Operation]

dst, CY

←

dst + src + CY

[Operand]

Mnemonic

Operand (dst, src)

Mnemonic

Operand (dst, src)

ADDC

A, #byte

ADDC

A, !addr16

saddr, #byte

A, [HL]

A, r

A, [HL + byte]

A, saddr

[Flag]

[Description]

•

The destination operand (dst) specified with the 1st operand, the source operand (src) specified with the 2nd

operand, and the CY flag are added and the result is stored in the destination operand (dst) and the CY flag.

The CY flag is added to the least significant bit. This instruction is mainly used to add two or more bytes.

•

If the addition result shows that dst is 0, the Z flag is set (1). In all other cases, the Z flag is cleared (0).

•

If the addition generates a carry from bit 7, the CY flag is set (1). In all other cases, the CY flag is cleared (0).

•

If the addition generates a carry from bit 3 to bit 4, the AC flag is set (1). In all other cases, the AC flag is

cleared (0).

[Description example]

ADDC A, [HL];

The A register contents, the contents at address (HL register), and the CY flag are added and

the result is stored in the A register.

Summary of Contents for 78K/0S Series




























































































































Search results

Summary of Contents for 78K/0S Series

Reviews:

Related manuals for 78K/0S Series

Brands by name

Popular brands

NEC 78K/0S Series, User Manual

Search results

Summary of Contents for 78K/0S Series

Reviews:

Related manuals for 78K/0S Series

Brands by name

Popular brands