NEC 78K/0S Series User Manual Download Page 75

Page: 75 / 123

CHAPTER 5 EXPLANATION OF INSTRUCTIONS

User’s Manual U11047EJ3V0UM00

ADDW

Add Word

Word Data Addition

[Instruction format]

ADDW dst, src

[Operation]

dst, CY

←

dst + src

[Operand]

Mnemonic

Operand (dst, src)

ADDW

AX, #word

[Flag]

[Description]

•

The destination operand (dst) specified with the 1st operand is added to the source operand (src) specified

with the 2nd operand and the result is stored in the destination operand (dst).

•

If the addition result shows that dst is 0, the Z flag is set (1). In all other cases, the Z flag is cleared (0).

•

If the addition generates a carry from bit 15, the CY flag is set (1). In all other cases, the CY flag is cleared

(0).

•

As a result of addition, the AC flag becomes undefined.

[Description example]

ADDW AX, #0ABCDH; ABCDH is added to the AX register and the result is stored in the AX register.

Summary of Contents for 78K/0S Series




























































































































Search results

Summary of Contents for 78K/0S Series

Reviews:

Related manuals for 78K/0S Series

Brands by name

Popular brands

NEC 78K/0S Series, User Manual

Search results

Summary of Contents for 78K/0S Series

Reviews:

Related manuals for 78K/0S Series

Brands by name

Popular brands