NEC 78K/0S Series User Manual Download Page 72

Page: 72 / 123

CHAPTER 5 EXPLANATION OF INSTRUCTIONS

User’s Manual U11047EJ3V0UM00

XOR

Exclusive Or

Exclusive Logical Sum of Byte Data

[Instruction format]

XOR dst, src

[Operation]

dst

←

dst

∨

src

[Operand]

Mnemonic

Operand (dst, src)

Mnemonic

Operand (dst, src)

XOR

A, #byte

XOR

A, !addr16

saddr, #byte

A, [HL]

A, r

A, [HL + byte]

A, saddr

[Flag]

[Description]

•

The destination operand (dst) specified with the 1st operand and the source operand (src) specified with the

2nd operand are XORed bit wise, and the result is stored in the destination operand (dst).

Logical negation of all bits of the destination operand (dst) is possible with this instruction by selecting #0FFH

for the source operand (src).

•

If the exclusive logical sum shows that all bits are 0, the Z flag is set (1). In all other cases, the Z flag is

cleared (0).

[Description example]

XOR A, L;

The A and L registers are XORed bit wise and the result is stored in the A register.

Summary of Contents for 78K/0S Series




























































































































Search results

Summary of Contents for 78K/0S Series

Reviews:

Related manuals for 78K/0S Series

Brands by name

Popular brands

NEC 78K/0S Series, User Manual

Search results

Summary of Contents for 78K/0S Series

Reviews:

Related manuals for 78K/0S Series

Brands by name

Popular brands