Other Features
72
1.
Press key.
2.
Press .
3.
Dial extension No. (e.g. 12)
4.
Press to accept.
5.
Press to cancel the pre-set time. (1 short beep tone
shall be sent.)
6.
Return to the idle condition automatically.
1.
Lift handset.
2.
Dial function code.(e.g. 959 or 059)
3.
Hang up.
Dial Block/Wakeup Call Status Confirmation
The setting status of Dial Block and Wakeup Call at each extension can be confirmed at DSS console paired
with Attendant extension (No.10).
1.
Press key.
2.
Press DSS key. The display shows the status.
3.
Press key to return to the idle condition.
Room Monitor
Room Monitor lets one extension monitor (listen to) the sounds in a room containing another extension.
1.
Off-hook condition. (Busy tone is heard.)
Note) KTS can be monitored by only KTS in another method. Refer to “Room Monitor” on Page 39.
1.
Lift handset.
2.
Dial the monitored SLT extension No. (Busy tone is heard).
3.
Press .
1. Replace the handset.
Attendant Call
Attendant Call allows extension user to call attendant extension by dialing a single digit.
1.
Lift handset or press .
2. Press .
1. Lift handset.(Intercom Dial Tone shall be heard.)
2. Press or .
Note: In case, the SLT user cannot access some features after lifting handset.
9
#
∗
∗
(Extension No.10 only)
OPAC
To cancel Wakeup Call:
(Extension No.10 with
DSS console)
CHECK
CLEAR
To check the status of Wakeup
call and Dial Block:
To activate Room Monitor at
Monitored
extension:
2
To activate Room Monitor
at monitoring extension:
To cancel Room Monitor
at monitored and
monitoring extension:
SPK
0
To place an Attendant
Call:
0
9
