Hold/Transfer/During Conversation
22
Park Hold
Park Hold allows you to place an outside call in a waiting state so that any other key telephone extension
within the same Park Hold group may pick it up. After parking the call, you can Page the person receiving
the call and hang up. The paged party just presses the Park Hold key from any extension within the same
Park Hold group to pick up the call. This is also useful when transferring a call to a key telephone that does
not have a line appearance on their phone for that line. Park Hold keys are assigned on Line keys by system
programming. If the line seized by Loop key is put on Park Hold, the Loop key’s LED goes off, and an idle
Trunk line can be seized by pressing the Loop key.
- While on an outside call.
1. Press key.
1. Lift handset.
2. Press key.
1. Lift handset.
2. Press key.
3. Press key.
4. Dial .
Note :The system has up to four Park Hold Groups.
Conference
Add-On Conference
Add-On Conference lets you establish an outside call and then add up to five other inside parties to the
conversation. If Multi-Line Conference is enabled in programming, a second outside call can be added to the
conversation.
<Method 1>
1. Establish an outside call.
2. Press key.
3. Press key.
4. Dial extension number of invited inside party. This party
must answer using the handset.
5. Press . Conference established. To add more inside
parties, repeat steps 2-5.
1. Establish an outside call.
2. Flash Hookswitch.
3. Dial 93.
4. Dial extension number of invited inside party.
5. Flash Hookswitch.
Conference established. To add more inside parties, repeat
steps 2-5.
1.
Lift handset.
To establish an outside call:
To join an Add-On
Conference when invited:
DND/CONF
DND/CONF
ICM
To place a call on Park Hold:
To answer a call on Park Hold:
To answer a call on I-Hold (the
call placed on System Hold or
Exclusive Hold by the extension
user itself) in case the line does
not have line appearance:
Park Hold
Park Hold
ICM
OPAC
3
