manualshive.com logo in svg

Neat INKA, Technical Handbook, Page: 15 / 36

Share
Download
Neat INKA Technical Handbook Download Page 15

 

INKA, IOR, REPO & LINK 

2.1.4  IOR Programmer, Wired Input Tab 

 

 

221

222

223

224

225

241 

242 

243 

244 

245 

211

212

213

214

215

201 

231

232

233

234

235

202 

203 

204 

205 

251

252

253

 

Explanation of controls 

 
201-205 

Input type for each wired input 

211-215 

Activation of relay output 

221-225 

Radio transmission and choice of radio ID code for outgoing alarm 

231-235 

Radio ID code used for outgoing alarm 

241-245 

Alarm type for outgoing alarm 

251-252 

Threshold voltage for analog input (in analog threshold mode) 

253 

Indicates whether analog inputs shall trig above or below threshold voltage 

 
 
The fields in the upper portion of the screen are arranged in rows. Farthest to the left, the number of a 
wired input is written. The first text field in the row determines the criteria for when the input will be 
trigged and the rest of the fields in the same row determine what actions will be performed when this 
input is trigged. 
 

 

 
 
 

 

Technical Handbook for the IOR Family (firmware v20.x), document number NE41 06007-02 v1.0 

15

 

Summary of Contents for INKA





































Reviews:

No comments