TG110DL User’s Manual
13 |
P a g e
NDT Systems, Inc.
5542
Buckingham Drive
,
Huntington Beach, CA 92649
,
PH: 714-893-2438
ENTERING DATA:
To enter a value in a data log, hold the transducer on the area of
interest and press the ENTER key when the reading is stable. The value measured
will be recorded in the currently flashing cell of the data log. To enter the next
value, use the RIGHT or LEFT arrow buttons to move to a new cell and repeat the
process above. The value in the current cell can be overwritten by pressing ENTER
again if a mistake has been made.
The user has total flexibility to scroll throughout the spreadsheet. For instance, the user may elect to enter the
first data point in row 6 column 7 while leaving the other cells blank or null. The data log will be saved with as
many or few points as entered.
Once finished entering data, pressing MENU will return the user to a screen which will allow the ability to view the
current data log, save more readings, edit the data log file name, or erase the data log. The current data log name
will be identified at the top of the screen.
NOTE: All readings stored & displayed in the log will be the actual thickness measured. You may choose to view the
thickness in differential mode, however, the actual thickness will be logged when pressing enter
Review:
Select
“R
eview
”
to access saved data logs. Use the UP arrow or DOWN arrow buttons and press ENTER to
navigate to the desired data log. Once a data log is selected, the user may select one of the following options,
“
View Log
”
,
“
Log Readings
”
(to add additional thickness readings to the currently selected data log),
“
Edit Name
”,
or
“
Erase
”
.
Erase All:
From the main data
log menu, select “Erase All” to clear
all saved data logs. A prompt will appear
confirming the user’s desire to
erase the data logs.
CAUTION! Once the data is cleared from memory, it should be considered unrecoverable.
DATA TRANSFER:
The files in the data logger may be uploaded to a Windows-based PC via the TG110-DTP Data
Transfer software program. Instructions for this program can be found in its associated user's manual. This
software and the necessary cable needed to connect the TG-110DL to your computer are included in all TG-110DL
packages.
