NDS Radiance Ultra SERIES, User Manual

Page: 13 / 50

Display User Interface | 3
Display Menu
To open the Display Menu, tap the MENU button.
The ZeroWire Menu displays by default, with
details of the current Primary and Secondary
inputs listed left and right across the top of the
menu above the menu tabs.
To select other menus, tap the or buttons to
highlight the menu tab, then tap the SCROLL button to
enter the menu.
To adjust a parameter, press the
SCROLL button to move
the row selection down to it, and then tap the or
buttons to adjust the parameter or to select a setting.
Parameter adjustments are applied in real time while
changing values or settings.
The Display Menu automatically closes 30 seconds after
the last action. It can also be closed by pressing the
MENU button.
Note: Grayed out descriptions indicate parameters not available for the current signal or input configuration.
ZeroWire Menu
Note: The ZeroWire Menu is enabled only on displays configured with an embedded ZeroWire Receiver.
To enter the menu and activate the ZeroWire linking process, tap the SCROLL button.
Refer to “ZeroWire Transmitter Setup” on page 28, and confirm that the display-mounted ZeroWire Transmitter is
facing the ZeroWire embedded Receiver display at a distance ≤ 8 feet (2.4 meters), and that both displays are
aligned vertically and horizontally within

10

at heights ≥ 5 feet (1.5 meters).
At the display-mounted ZeroWire Transmitter, press and hold the button until the Linking LED begins
flashing.
Linking LED