NCR S26, User Manual, Page: 38 / 220

Upgrading the Memory
3-6 Adding and Replacing Components
Bank
0 Bank
1 Bank
2 Bank
3 Total
S1 S2 S3 S4 S5 S6 S7 S8 Memory
8 MB 8 MB 16 MB 16 MB 32
MB 32
MB 32
MB 32
MB 176 MB
8 MB 8 MB 8 MB 8 MB 16
MB 16
MB 16
MB 16
MB 96 MB
8 MB 8 MB 8 MB 8 MB 32
MB 32
MB 32
MB 32
MB 160 MB
16
MB 16
MB 16 MB 16 MB 32
MB 32
MB 32
MB 32
MB 192 MB
8 MB 8 MB 8 MB 8 MB 8 MB 8 MB 8 MB 8 MB 64 MB
16
MB 16
MB 16 MB 16 MB 16
MB 16
MB 16
MB 16
MB 128 MB
32
MB 32
MB 32 MB 32 MB 32
MB 32
MB 32
MB 32
MB 256 MB
64
MB 64
MB 64 MB 64 MB 64
MB 64
MB 64
MB 64
MB 512 MB
The configurations in Table 3-1 are only some of the available memory
combinations. You can use other combinations if you follow the rules for
upgrading memory as described below.
Restrictions
When adding memory, consider the following:
•
Use only one type of SIMM in a given bank. You may combine different
types of SIMMs for a memory configuration only if the SIMMs in each
bank are the same type.
•
You may use the memory banks (Bank0 ~ Bank3) in any order.
•
Always install SIMMs in pairs. For example, for a total memory of
16 MB, install two 8 MB SIMMs in a bank. You cannot use a 16 MB
SIMM alone for 16 MB of memory.