NCR S26, User Manual, Page: 12 / 220

Where to Start
1-2 Installation and Documentation Overview
Where to Start
To install and configure your server, perform these steps.
Step What to Do How to Do It Where to Find Information
1 Install any hardware
you want to add Install appropriate
disk drives,
peripherals, and
adapters Quick Hardware Installation
brochure
Chapters 2 and 3 of User
Guide
Drive, peripheral, CPU
board, and adapter
documentation
2 Configure system
settings Use the BIOS
Setup Utility Quick Hardware Installation
brochure
Chapter 2 of
Installing
Network Operating System
Chapter 4 of User Guide
3 Configure the PCI
adapters Use the BIOS
Setup Utility Same as Step 2
4 Configure the SCSI
adapters and drives Use the Adaptec
SCSI adapter
firmware Setup
Utility Adaptec SCSI Adapter
documentation
Chapter 4 of Installing
Network Operating System
5 Configure memory
and other system
board settings Use the EISA
Configuration
Utility
Quick Hardware Installation
brochure
Chapter 3 of Installing
Network Operating System
Chapters 3 and 5 of User
Guide
6 Configure EISA
adapters Use the ESIA
Configuration
Utility Quick Hardware Installation
brochure
Chapter 3 of Installing
Network Operating System
Chapter 5 of
User Guide