manualshive.com logo in svg

NCR RealScan 7802, User Manual

Share
Download
NCR RealScan 7802 User Manual Download Page 90

NCR RealScan 7802 Price Verifier User Guide

06/03

497-0425530    Release E

90 of 94

Radio Frequency Interference Statements

Federal Communications Commission (FCC)

Note

This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the
user is required to correct the interference at his own expense.

Information to User

This equipment must be installed and used in strict accordance with the manufacturer's
instructions. However, there is no guarantee that interference to radio communications
will not occur in a particular commercial installation. If this equipment does cause
interference, which can be determined by turning the equipment off and on, the user is
encouraged to consult an NCR service representative immediately.

Caution

NCR is not responsible for any radio or television interference caused by unauthorized
modifications of this equipment or the substitution or attachment of connecting cables
and equipment other than those specified by NCR. Such unauthorized modifications,
substitutions, or attachments may void the user's authority to operate the equipment.
The correction of interferences caused by such unauthorized modifications,
substitutions, or attachments are the responsibility of the user.

Wireless Units

The antenna used for this transmitter must be installed to provide a separation distance
of at least 20-cm from all persons and must not be co-located or operating in conjunction
with any other antenna or transmitter. End users and installers must be provided with
antenna installation and transmitter operating conditions for satisfying RF exposure
compliance.

Summary of Contents for RealScan 7802































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands