NCR RealScan 7802, User Manual

Page: 39 / 94

NCR RealScan 7802 Price Verifier User Guide
497-0425530 Release E 06/03 39 of 94
EventStart
An 8 character string of hex digits representing a bitmap of which starting events are
to cause a message to be sent to the host.
Button Position Left 2
nd
from Left 3
rd
from left Right
Label Event0 Event1 Event2 Event3
Value 00000001 00000002 00000004 00000008
Before an event is reported the value in the modes EventStart and EventEnd must be
set. If EventStart is zero, no starting event is reported; likewise for EventEnd. If
EventStart and EventEnd are both set to 00000001, then pressing the leftmost button
generates an event report and releasing the button also generate an event report.
WallPaperEvent
An 8 character string of hex digits representing a bit map which enable event
messages ( such as button pushes) to be sent only during the time wallpaper is
displayed (usually after an item is scanned).
Button Position Left 2
nd
from Left 3
rd
from left Right
Label Event0 Event1 Event2 Event3
Value 00000001 00000002 00000004 00000008
User1
A string up to 255 characters long that can be set and read by the application.
RegisterINI
The RealScan 7802 registers itself with the ProductInfo host after successfully reading
a new INI file.
RegisterStart
The RealScan 7802 registers with the ProductInfo host upon startup.
DisplaySetup
Display the first information screen at startup.
DisplaySetup2
Display the second information screen at startup
DisplayAll
Display passwords on the information screens
NoBarCodes
Disable configuration by barcode mode
Version
Returns a string containing the software version number
Diversity
Enable diversity antennas. ‘ENABLED’; ‘PRIMARY’; ‘SECONDARY’. Use primary or
secondary only, the RealScan 7802 has only one antenna. The default is primary and
the antenna is connected to the primary input on the RF NIC card.
Wireless
‘TRUE’ sets the RealScan 7802 communications to wireless RF. ‘FALSE” sets
communications to 10baseT Ethernet.
FlashHash
A CRC calculated on the content of flash memory. The CRC is displayed on the initial
bootup status screen. Display format is CCCC-TTTT where the 1
st
four hex digits are
the calculated CRC and the 2
nd
four hex digits are the received CRC from the host.
Both CRC’s must match to ensure no file corruption during download. There is no
error correcting mechanism at this time. Also displays in UnitConfig.