manualshive.com logo in svg

NCR RealScan 7802, User Manual

Share
Download
NCR RealScan 7802 User Manual Download Page 14

NCR RealScan 7802 Price Verifier User Guide

06/03

497-0425530    Release E

14 of 94

20023

2.

 

Remove the front cover of the stand and mark the position of the two holes in the
base for mounting it to a horizontal surface. The two connectors are routed down,
inside the stand, and exit from the bottom. A hole may be drilled in the mounting
surface to permit the connectors to pass through to the inside of a cabinet to hide the
installation.

3.

 

Slide the RealScan 7802 housing onto its bracket until it snaps in – the housing
should slide all the way onto the bracket with the rear touching the back of the
bracket when it snaps in. If the RealScan 7802 has connectors hanging down, make
sure they are not caught between the bracket and the housing.

Wiring the Ethernet Model

Once the RealScan 7802 unit is mounted in place there are only 2 cables that have to be
connected before it can be operated. For aesthetic reasons NCR suggests the AC and
network outlets are mounted close to (or in) the ceiling or close to the floor. The two
cables may also be routed inside the wall or column and plug into the AC and network
connections in the ceiling. This is the recommended method and provides the cleanest
installation.

1.

 

Plug the RJ45 cable Ethernet cable connected to the hub or switch on your LAN into
the RJ45 connector in the rear of the RealScan 7802.

2.

 

Connect the 8-pin DIN extension cord and the DIN connector coming from the
RealScan 7802 unit. Line up the arrows on the two connectors and the pins are
aligned for insertion. On later production units, the 8-pin DIN connector is mounted
on a PC board that is accessible from the back of the unit underneath the mounting
bracket. The RJ45 Ethernet connector is also mounted on this PC board.

Summary of Contents for RealScan 7802































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands