manualshive.com logo in svg

NCR RealScan 7802, User Manual

Share
Download
NCR RealScan 7802 User Manual Download Page 19

NCR RealScan 7802 Price Verifier User Guide

497-0425530    Release E

06/03

19 of 94

Chapter 3 – Installing the

Software

The 

SetupServer

 program on the CD-ROM must be run on your Windows network

server to create a specific RealScan 7802 directory called 

POS

 on your servers’ hard

disk, share it and copy the default realscan.ini file into this directory. RealScan 7802
units look for this .ini file in the POS directory when they boot up and can not operate if
they can’t find it.

You should also install 

Unit Configuration

 on the server as it provides the easiest way to

change the configuration of a unit on the network (as opposed to scanning barcodes).
You may also install 

Unit Configuration

 on a desktop or laptop computer for initially

setting up RealScan 7802 units without a network complicating it. You need a network
interface card (NIC) installed in your PC and configured properly to communicate with
the RealScan 7802.

For servers that are running other than Windows, sources are provided for the server
software. There are also freely available drivers to permit any operating system to act as
a Windows-type server.

Important: The shared RealScan 7802 directory and the realscan.ini file must be on the
server and the RealScan 7802 units must be able to find them when they power up. If
you want to change the operating modes (or configuration) of a specific unit anytime
after the system is up and running, the Unit Configuration program is available in the
NCR directory.

Server Install

When you place the NCR SDK CD-ROM (NCR part number 497-0426202) into a drive,
the autoplay feature opens a window with the folders and program icons. Click on the
NCR icon 

SetupServer

 and the install program leads you step by step through the

process of creating the 

POS

 directory, sharing it, and copying the realscan.ini file into

the directory.

Server install also creates a font directory under 

POS

 and loads all the fonts on the CD-

ROM into this directory. The RealScan 7802 has one default font set programmed into
the unit. This is a 16x32 pixel glyph containing all 256 characters of the extended ASCII
character set – thus any Latin based language can be supported from this font set.

Unit Configuration

Click on the NCR icon 

UnitConfig

 in the SDK CD-ROM window and the 

Unit

Configuration

 program is installed. This program which consists entirely of the one

screen shown in the section on using 

Unit Configuration

, implements the specific set of

commands and controls defined in the API for the RealScan 7802 (see 

Interfacing to the

Back Office Server

). The program is written in Visual Basic® and the sources and an OCX

are provided on the CD-ROM so users can write directly to this program and make
initiate mode changes from their application program

Summary of Contents for RealScan 7802































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands