NCR RealScan 7802 User Manual Download Page 35

Page: 35 / 94

NCR RealScan 7802 Price Verifier User Guide

497-0425530 Release E

06/03

35 of 94

10.

Text transfers using the default extended ASCII character set shown in Appendix D
should be sent in nominal mode. This is because many libraries do not properly
handle the characters outside of the usual ASCII range (32-127) correctly.

NCR RealScan 7802 Supported Modes

This section defines the device specific implementation for the RealScan 7802.

Note:

Mode names are case insensitive. Values have case preserved.

Fixed Unit Identification

BuildInfo

The date and time of the software release in the format YYYYMMDDhhmmss; read–
only.

ProductName

“NCR RealScan 7802”; read-only.

Serialnumber

Contains the unique serial number for the unit; read–only.

User Configurable Unit identification

UnitID

The host name of the unit.

UnitIP

The IP address of the unit, in standard IP dotted notation.

Unitmask

The network mask for the unit, in standard IP dotted notation.

GatewayIP

The IP address of the gateway machine, in standard IP dotted notation. Required
only if access to the various hosts must be routed on the LAN.

UserName

The username the RealScan 7802 uses when logging into the file server.

Password

The password the RealScan 7802 uses when logging into the file server.

Setup for Windows Networking (SMB)

Domain

Network domain is required when security is a concern.

DNS

Domain Name Server IP Address (if required to resolve network host names)

NetworkName

Name of the wireless network (ESSID). Identifies the network access point for
wireless units.

WINSServerIP

The IP address of the WINS server, in standard IP dotted notation, if the file server is
not on the local network.

WindowsServ

The host name of the Windows server.

ShareName

The name of the shared directory on the Windows server.

Summary of Contents for RealScan 7802






























































































Search results

Summary of Contents for RealScan 7802

Reviews:

Brands by name

Popular brands

NCR RealScan 7802, User Manual

Search results

Summary of Contents for RealScan 7802

Reviews:

Brands by name

Popular brands