manualshive.com logo in svg

NCR RealScan 7802, User Manual

Share
Download
NCR RealScan 7802 User Manual Download Page 44

NCR RealScan 7802 Price Verifier User Guide

06/03

497-0425530    Release E

44 of 94

For the Demoserve data file (data.dat) on the CD-ROM, the characters |> indicate a Big-
Endian string and |< indicates a Little-Endian string.

Note:

 Demoserve actually sends the FE FF or FF FE bytes not |> or |<.

A utility program, dmp2gdf, provided on the CD-ROM creates a .gdf (double-byte) font
file from a single byte ASCII font file.

Using the Touch Screen

Introduction

The NCR  RealScan 7802 Price Verifier is a networked thin client and does not respond
directly to any input from a local device.  Activating any of the input devices—barcode
scanner,  touch screen, K590 printer, causes the RealScan 7802 to transmit the raw input
data to a host computer for further action by the server based application.

Touch Screen Description

The digital touch panel is organized as a 16 column x 12 row matrix. The LCD screen
resolution is 320 x 240 pixels (¼ VGA), thus each of the 192 discrete touch areas formed
by the matrix is a 20 x 20 pixel square [which is dimensionally ¼”x ¼”] and defines the
maximum resolution of the touch screen.  Touch screen resolution scaling—increasing
the dimensional size of the touch areas—may be set for each axis independently down
to 1 column x 1 row;  in other words the whole display screen functions as a single touch
button.   The resolution scaling can also be changed dynamically by the users
application.  Factory default setting is at the touch screens highest resolution of 16 x 12
where the top left corner co-ordinate is y,x = 0,0 and the bottom right corner co-ordinate
y,x = 11,15.

Touching the panel anywhere within a specific 20 x 20 pixel area or resolution scaled
area will stuff the start mask and y,x co-ordinates of that touch area and the number of
10 millisec clock ticks since the last event into the EVNT packet and transmit it to the
host computer application.

Configuring Scanvue for Input Devices

General

RealScan 7802 must be running software version 5.02 or later to support the touch panel.
Run the UnitConfig program on the server to configure the unit.

Enable Multiplexer

An additional touch screen controller/multiplexer PCB is installed in all RealScan 7802
units with a touch panel.  Set the MUX ENABLED mode to TRUE.  The touch panel will
not operate unless you do this.  In software versions later than 5.02 the multiplexer is
detected and enabled automatically and this mode will not show up in UnitConfig.

•

 

Set MUX ENABLED to TRUE

Summary of Contents for RealScan 7802































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands