2-12 Chapter 2: Hardware Installation
6.
If external power is used, connect the 5972 Display Cable Power
Pigtail to the Power Brick. Plug the Power Brick into an AC outlet.
5973 International VFD Customer Display
14528
(4) Screws
1.
Place the Display Mount on the desired surface within 4 meters (13
feet) of the host terminal.
2.
Determine if the cable should be routed down through the
mounting surface or if it should be run on top of the surface.
Summary of Contents for 7460
