NCR 7460, User Manual, Page: 120 / 153

4-4 Chapter 4: Operating System Recovery
If No is selected:
•
The Ghost error file is displayed before rebooting only if Ghost
aborts.
Caution:
If the error file is displayed, the batch file pauses for user
input before rebooting. You may use Ctrl-C to cancel out of the batch
file if you want to see the error file again, but
nothing should be done
that writes to the hard disk before rebooting. GHOST.ERR is on the
RAM disk and is lost on reboot.
12.
Select which type of recovery you want to perform from the next
menu (normally option #1).
1)
Redo entire disk with the first partition the same size.
2) Redo the first OS partition.
3) Redo the second OS partition.
The Ghost software then begins the disk recovery from the CD.
It displays a progress bar and gives you an estimate how long
the process should take.
When the recovery process is completed, the client hard disk is
restored to its preinstalled condition, as originally received
from the factory.
13. Enter Setup when the terminal reboots and reset the
Parallel
CD-ROM Boot
to
Disabled
.
14. Exit Setup and Save Changes.