NCR 7460, User Manual, Page: 21 / 153

Chapter 1: Product Overview 1-7
Hardware Module Descriptions
Processor Board
Processor/Chip Set
The terminal uses an Intel architecture processor, which permits it to
leverage existing software drivers and applications, as well as provide
the greatest flexibility in choosing an operating system. This provides
several other advantages:
•
Capable of SW MPEG-1 or MPEG-2 playback at 30 frames per
second with 22 kHz stereo audio (may be limited by OS
constraints).
•
Java Benchmark performance > 1000 Caffeinemarks, JIT compiled
•
OS support to run Java
•
Expansion capabilities for optional features and future
requirements (ISA/PCI bus and USB)
Video Subsystem
The video subsystem supports the following LCD types:
•
12.1" active matrix (TFT) 800x600 with 64 k colors
Support for the LCD integrated display is provided internally. External
support for SVGA monitors (800x600 [or better] resolution and 64 k [or
better] colors) is provided by a CRT 15-Pin D-shell connector.
The LCD back lighting is also software controlled. In addition to OFF
and ON modes, a
dimmed mode is supported in the hardware to allow
increased tube life. If appropriate software drivers are loaded, full
brightness is restored when touched, motion detection (Motion Sensor
section), or an application request (i.e., to play promotional material on
a preset schedule).